maine

Via Libertà, 38 – 81024 Maddaloni (CE) ITALY -Tel. +39 0823 408798

PROGRAMMI PROFESSIONALI AL COSTO DI PROGRAMMI ECONOMICI

Realization and Sale Of Programs Of Engineering (Structural Calculation, Installation, Land register, Etc.)------------------Assemblage COMPUTERS--------------------Technical support For Office Machine Also at home------------------- Possibility to View The Programs Without Obligation------------------- to Phone For Any Information Or to Send E-mail at the address anarsoft@libero.it----------------- The Prices are without Value Added Tax.

Software list

Almost all the existing, even if very complete, most powerful programs of calculation, especially in the drawing of the beams, of the pillars and of the carpentries, neglect completely particular structural that, instead, they are very important, what the attic, the staircases, the starts. From here the importance of these small programs that, also being very simple, they occupied really of these details helping, in few minutes, the professional to the scheme of details that, if taken care of, they ask for times.

The programs of this necklace introduce a main point characteristic that other similar products don't consider: to do so that the professional that uses them always knows what he is doing and always knows how to manage the gotten results. Often the existing programs in commerce limit him to furnish the final results without giving the possibility to understand as it has come. The technician is forced to accept them and to introduce them as they are.

Instead here we had always the possibility to know how the program reasons. The final relationships are very detailed and, for the most greater part, they furnish footstep-footstep the used formulas and the done calculations. But not only: detailed signs of theory are always presents so that the consumer can know on that the calculation founds and, therefore, whether to accept it or less. Naturally the present theory doesn't have the pretension to be an essay in subject, but only, as says, to make to know how the program reasons and to remember the various treated matters to the technician.

THE ENGLISH PAGES ARE UNDER CONSTRUCTION.

THE LINKS OF THIS PAGE GO TO THE ITALIAN PAGES

BE PATIENT FOR THEIR TRANSLATION AND FOR THE TRANSLATION OF THE SOFTWARE.

LIST OF THE SOFTWARE
	CALCOLO DI SBALZI D'ANGOLO E SCALE A SOLETTA R. This program helps in the calculation and in the design of starts of angle and side and of insole staircases rampant, with creation of a detailed file DXF, usable as executive of yard, with the indication of the irons and their dimensions. It compiles, besides, a very detailed relationship of calculation. A section of theory makes to understand the way of reasoning of the program. VERIFICATION TO THE LIMIT CONDITION Now you can find it in the best library with the book "Scale e sbalzi"	Go to the book page in the site of DarioFlaccovioEditore
	CALCOLO DI SOLAI IN C.A. VER. 4.1 For the calculation and the automatic design of attics in c.a., both with joists thrown in work and with prefabricated joists. Possibility to view the diagram of the moment lived section for section; enveloped diagrams of the moment, of the resistant moment, for the various combinations of load; creation of the relationship of calculation and the graphic file in DXF. A section of theory illustrates all the consequential problems from the attics. VERIFICATION TO THE LIMIT CONDITION € 70,00	Vai alla pagina di illustrazione del funzionamento del programma.
	GEOTECNICA E FONDAZIONI VER. 2.0 Calculate of plinths, beams of foundations, plinths on poles, beams cuffs on poles, walls of support, load limit for direct foundations and for poles, various problems on the lands.. VERIFICATION TO THE LIMIT CONDITION Now you can find it in the best library with the book "Calcolo delle fondazioni"	Go to the book page in the site of DarioFlaccovioEditore
	ARMURI - MURI DI SOSTEGNO Software for the calculation and verification of sustaining wall. The sustaining wall can be all the shape and in generic conditions. Creation of the relationship of calculation and the graphic file in DXF. VERIFICATION TO THE LIMIT CONDITION € 70,00	Vai alla pagina di illustrazione del funzionamento del programma.
	CATASTO E TOPOGRAFIA Passage of the books "pregeo" in file DXF to load them with Autocad. Polygonal, surveys for intersections, levellings, transformation of angles and coordinates. COMPATIBLE WITH PREGEO 10 € 50,00
	ARMUR - VERIFICHE DI EDIFICI IN MURATURA Program for the verifications of buildings in masonry performed according to the ordinance 3274/2003. There is also the verification with the old method POR, the verification for vertical loads and with simplified sizing. € 70,00
	PROBLEMI DI ESTIMO CIVILE The program has the purpose to drive footstep footstep, with instructions detailed to screen in the resolution of the following problems,: esteems of built with the methods synthetic, analytical and for corrective coefficients; esteems of lands with the methods synthetic and for value of transformation; respect of the real rights (usufrct, enphyteusis, of surface and annuity); problems of financial mathematics (simple and composed interest, amount, discount, accumulation annuity and periodicity, mutual); calculation of the equitable canon; calculation of the burdens of urbanization and costs of construction. Editing of detailed final relationship. € 50,00 OR IN GIFT IF YOU BUY TWO PROGRAMS
	CALCOLO ONERI DI URBANIZZAZIONE E COSTI DI COSTRUZIONE Program for the realization and the press of complete relationship with calculation of the Burdens according to the law 10/77 (Bucalossi). Nella sezione DOWNLOADS si può scaricare gratuitamente una versione dimostrativa del programma ed un esempio di relazione in formato pdf creata dal programma stesso. € 50,00 OR IN GIFT IF YOU BUY TWO PROGRAMS	ALLA PAGINA SUBBUTEO
	STATICA DEL CEMENTO ARMATO E DELL'ACCIAIO It resolves tied up problems to the statics of elements in armed cement or in steel: Normal effort, bending, cut, torsion, etc. € 50,00

HARDWARE REQUIREMENT

GO TO THE TABLE SOCCER PAGE

The program of this range doesn't need great computers.

They work on any PC Pentium.

The only required requisite are the endowment of a reader CD and of a drive for

floppy from 3' 1/2.

The least graphic resolution is the 640x480 to exclusion of the programs "ARMUR" and

"Catasto e Topografia" that they ask for a least resolution of 800x600.

ALL THE PROGRAMS WORK WITH OPERATING SYSTEM WINDOWS 95/98/ME/XP

POSSIBILITY TO VIEW A PROGRAM (ONLY FOR ITALY)

Who want to try to house one of the programs can ask for it and we will sent free him and without obligation. You can try it at home for a week and then you can decide whether to hold back it and to pay its cost through one of the formalities described subsequently, or if to return it in the case you don't think it profit.

The possibility of test is limited to one program for time.

THE COMPLETE VERSIONS OF THE PROGRAMS CAN BE VIEWED WITHOUT OBLIGATION OF PURCHASE

DIRECTLY IN THE CENTER OF MADDALONI

TO PHONE FOR EXPLANATIONS AND FOR FURTHER INFORMATION ON THE PRODUCTS

HOW TO ASK FOR THE PROGRAMS

The described programs can be in demand phoning to the numbers: +39 0823 408798 e 338 2398438

It's also possible order through electronics posts to the address: anarsoft@libero.it.

For payment in countersign there will be a contribution of € 10,00 general for shipping and handling. For anticipated payment, instead, the shipping and handling will be free. The anticipated payment can happen with postal C/C or with recharge PostePay, or directly with Credit card through the account PayPal. To also point out Your fiscal data, so that, together with the program, the regular invoice can also be sent You.

Ordering at least two programs will be sent complimentary the program of Estimo.

On every order a program for the Management of the Invoices will be sent for professionals.

The complete programs can directly be examined in the center of Maddaloni, previous telephone appointment or for e-mail, without any obligation of purchase.